Explosion proof Rotary Electric Actuator

Looking for an explosion-proof rotary electric actuator? Look no further! We are a factory offering top-quality products that meet your safety requirements.

Request a Quote
  • Explosion proof Rotary Electric Actuator
  • Explosion proof Rotary Electric Actuator
  • Explosion proof Rotary Electric Actuator

PRODUCTS DETAILS

Explosion proof  Rotary Electric Actuator introduction

Rotary Electric actuator is a driving device that can provide linear or rotary motion. It uses a certain driving energy source and works under a certain control signal. It uses electricity or other energy sources and converts it into a drive through a motor, cylinder or other device effect. Explosion-proof electric actuators are IP67, NEMA4 and 6, and IP68 is available. Fully enclosed squirrel-cage motor, small size, large torque, low inertia, insulation class F, built-in thermal protection switch, can prevent damage to the motor.

Explosion proof Rotary Electric Actuator Features

The main advantages of electric actuators are the high stability and the constant thrust that can be applied by the user. The maximum thrust produced by the actuator can be as high as 225000kgf. Only hydraulic actuators can achieve such a large thrust. Much higher. The anti-deviation ability of the electric actuator is very good. The thrust or torque output is basically constant. It can overcome the unbalanced force of the medium and achieve accurate control of the process parameters. Therefore, the control accuracy is better than that of the pneumatic actuator. A.Small Size: 35% smaller than other kind electric actuators. B.Light Weight: 35% lighter than other kind electric actuators. C.Safety Guarantee: Tested by AC 1500V power and can withstand it; F-grade insulation motor guarantees safe operation. D.Easy to Form Complete Set: 110V, 220V, 380V are all available. E.Various Motion Time: 9s,13s, 15s, 30s, 50s, 100s. F.Certificates: CE, ATEX G. Control module The resin-encapsulated control module has remarkable features such as high resolution, strong function, anti-vibration, long life and reliability. H. Servo mechanism The built-in control module continuously compares the input signal and the feedback signal of the potentiometer. When the balance is reached, the motor is stopped, and then the output shaft keeps the valve at the corresponding position until the input signal changes. Ensures precise and continuous valve opening adjustment I. The intelligent integrated device for automatic control has a signal of 4-20mA. DC input and output can be controlled by computer PLC and DCS system. Proportional adjustment control and positioning without manual control. It can be self-locking in position, simple in wiring, stable and reliable performance, and control accuracy. High, fast response and so on. J. Easy installation and simple connection. K. Conventional single-phase 220V voltage, special supply is DC220V, DC24, AC110V three specifications.
Product Name Explosion proof Electric Actuator
Power Supply DC 24V, AC 110V, AC 220V, AC 380V
Motor Induction Motor (Reversible Motor)
Indicator Continuous Position Indicator
Travel Angle 90°±10°
Material Die-casting Aluminum Alley
Protection Class IP67
Installation Position 360° any available direction
Ambient Temp. -30℃~ +60℃

Explosion proof Electric Actuator Torque(N.m.) and Model Selection

Model

Max Output

Operating

Drive Shaft(mm)

Motor

Single-phsae

Flange

Torque (N.m)

Time 90°(Sec.)

(W)

rated current(A)

Size

220VAC/24VDC

Square

220VAC/24VDC

EX05

50N.m

30/15

14X14

10

0.25/2.2

F05/F07

EX10

100N.m

30/15

17X17

15

0.35/3.5

F05/F07

EX20

200N.m

30/15

22X22

45

0.3/7.2

F07/F10

EX40

400N.m

30/15

22X22

60

0.33/7.2

F07/F10

EX60

600N.m

30/15

27X27

90

0.33/7.2

F07/F10

EX100

1000N.m

40/20

27X27

180

0.47/11

F10/F12

EX200

2000N.m

45/22

27X27

180

1.5/15

F10/F12

Electric Actuator FAQ

Q1:Motor Don’t Run ? A1:Check Power Supply Normal or not , Voltage Normal or not. Check input Signal. Check the control box and Motor damage or not.   Q2: The input signal doesn’t conform with opening ? A2: Check Input Signal. Readjust Multiplying-power to zero position. Readjust the Potentiometer gear.   Q3: No Opening Signal ? A3: Check Wiring.

Hot Products

Pneumatic Wafer Butterfly Valve

Pneumatic Wafer Butterfly Valve

3-Way Sanitary Diaphragm Valve

3-Way Sanitary Diaphragm Valve

Double Square Adapter

Double Square Adapter

Modulating Electric Actuator

Modulating Electric Actuator

Pneumatic High Performance Double Eccentric Butterfly Valve

Pneumatic High Performance Double Eccentric Butterfly Valve

Stainless Steel Pneumatic Actuator

Stainless Steel Pneumatic Actuator

Linear Smart Pneumatic Valve Positoner

Linear Smart Pneumatic Valve Positoner

Pneumatic PVC Ball Valve

Pneumatic PVC Ball Valve

Explosion proof Rotary Electric Actuator

Explosion proof Rotary Electric Actuator

APL210N Position Indicator Limit Switch Box

APL210N Position Indicator Limit Switch Box

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours